Getinge Maquet PowerLED II User Manual

4
Use
Controlling the light
58 / 116
Maquet PowerLED II
IFU 01811 EN 10
4.2.6.2 From the touchscreen control panel
1
2
Fig.59: Synchronising the lightheads
1. Configure one of the lightheads 1 to the desired settings.
2. Press Synchronise 2 .
Ø The lightheads are now synchronised and all changes on one lighthead will result in the
same changes being applied to the other lighthead(s).
3. Press Synchronise 2 again to desynchronise the lightheads.
Ø The lightheads are desynchronised.
NOTE
Special case: To synchronise lightheads with ambient light mode, this mode must
be active on the lightheads concerned before synchronisation.

Getinge Maquet PowerLED II Specifications

General

Brand	Getinge
Model	Maquet PowerLED II
Category	Medical Equipment
Language	English