Maintenance
Visual and functional inspections
7
Maquet PowerLED II
IFU 01811 EN 10
103 / 116
7 Maintenance
To preserve your device’s original performance and reliability levels, annual maintenance and in-
spections should be performed as follows. During the guarantee period, maintenance and inspec-
tions must be performed by a Getinge technician or a Getinge-approved dealer. After this period,
maintenance and inspections may be performed by a Getinge technician, a Getinge-approved
dealer or a hospital technician trained by Getinge. Please contact your dealer to undergo the
technical training required.
7.1 Visual and functional inspections
NOTE
To ensure that the product used is compliant, various visual and functional inspec-
tions must be performed by trained personnel. It is recommended that records be
kept of the results of these inspections, along with the date and signature of the
person performing them.
If the device has a Getinge backup system, perform a battery lifetime test. To test from the wall-
mounted control keypad, the lightheads must be turned off and the test start button must be
backlit to enable the test to be started. To test from the touchscreen control panel, the battery
icon must be displayed in the status bar.
Inspection Action
Backup fail test (only for a battery-backed system)
1. Perform a battery lifetime test via the wall-mounted control
keypad (From the wall-mounted control keypad [8Page94]) or
via the touchscreen control panel (From the touchscreen control
panel).
2. If the test fails, contact technical support.
Tab.34: Monthly visual and functional inspections
7.2 Maintenance schedule
This table summarises the main maintenance steps to be performed during the product lifetime.
Description Maintenance interval
1 year 3 years 6 years 10 years
General maintenance of the device X
All brakes on the device X
Suspension mounting screws X
Spring arm locking screws X
Safety segment of the spring arm X
Batteries X
Tab.35: Maintenance schedule
7.3 Contact
The contact details of your local Getinge representative can be found on https://
www.getinge.com/int/contact.