Getinge Maquet PowerLED II - Monitor Mount Built into the Device; Options; Wall-Mounted Remote Control Panels

Introduction
Product overview
1
Maquet PowerLED II
IFU 01811 EN 10
17 / 116
1.6.1.3 Monitor mount built into the device
SC05 camera mount
Fig.9: SC05 camera mount
This camera mount is intended to hold high-
resolution medical cameras, and provides
wide clearance to enable complex signal
cables to be routed. A Kodak screw is used to
mount the camera, which can be oriented in all
directions in order to obtain views of the oper-
ating field from various angles.
1.6.2 Options
1.6.2.1 Wall-mounted remote control panels
1
2
3
4
5
Fig.10: Wall-mounted control keypads
1 Recessed version
2 Surface-mounted version
3 Recessed version with front panel
4 Power supply version
5 Wall-mounted control keypad