Getinge Maquet PowerLED II User Manual

Use
Installing or removing a sterilisable handle
4
Maquet PowerLED II
IFU 01811 EN 10
63 / 116
Fig.64: Removing an STGPSX01 sterilisable handle
Removing an STGPSX01 sterilisable handle
1. Press the locking button.
2. Remove the handle.
4.3.2 Installing or removing an STGHLX01 sterilisable handle
Fig.65: Installing an STGHLX01 sterilisable handle
Installing an STGHLX01 sterilisable handle
1. Inspect the handle and check for cracks or soiling.
2. Insert the handle on the mount.
3. Rotate the handle until its rotation is locked.
Ø The locking button pops out of its housing.
4. Check that the handle is firmly in place.
Ø The handle is now locked in place and ready for use.

Getinge Maquet PowerLED II Specifications

General

Brand	Getinge
Model	Maquet PowerLED II
Category	Medical Equipment
Language	English