Introduction
Instructions for reducing the environmental impact
1
Maquet PowerLED II
IFU 01811 EN 10
33 / 116
This service lifetime does not apply to consumables such as sterilisable handles.
This 10-year service lifetime applies subject to annual periodic checks being performed by per-
sonnel trained and approved by Getinge; see Maintenance schedule [8Page103]. After this
time, if the device is still in use, an inspection must be carried out by personnel trained and ap-
proved by Getinge to ensure the continued safety of the device.
1.14 Instructions for reducing the environmental impact
To ensure optimum use of the device while limiting its impact on the environment, here are some
rules to follow:
• Reduce power consumption by switching off the device when not in use.
• Position the device correctly so as not to have to compensate for poor positioning by increas-
ing the lighting power.
• Follow the specified maintenance schedule in order to keep the level of environmental impact
as low as possible.
• For questions relating to waste treatment and device recycling, refer to the Waste manage-
ment chapter.
• Use the various options wisely to avoid needless power consumption.
Fig.27: Power consumption of device in operation
NOTE
Power consumption for the device is provided in chapter 9.2, Electrical specifica-
tions.
The device does not contain hazardous substances in accordance with RoHS dir-
ective (see Tab. 5) and Reach regulation.