Getinge Maquet PowerLED II User Manual

4
Use
Controlling the light
48 / 116
Maquet PowerLED II
IFU 01811 EN 10
4.2 Controlling the light
4.2.1 Turning the light on and off
4.2.1.1 From the lighthead or wall-mounted control keypad
1
1
2
Fig.49: Turning the light on and off via the keypads
Turning on the light, one lighthead at a time
1. On a wall-mounted control keypad, press the button 2 for the lighthead to be turned on, and
hold it until the button is backlit.
2. Press the On/Off 1 button to turn on the lighthead.
Ø The LED sectors are turned on in sequence, and the illumination level is set to the last
value used when the light was turned off.
Turning on the entire light system (via the wall-mounted control keypad only)
1. Press On/Off 1 .
Ø The LED sectors on all lightheads are turned on in sequence, and the illumination level is
set to the last value used when the light was turned off.
Turning the light off via the lighthead keypad
1. Press the On/Off 1 button and hold it until the keypad turns off.
Ø The LED sectors on the lighthead are turned off in sequence once the button is released.
Turning the light off via the wall-mounted keypad
1. Press the button 2 for the lighthead to be turned off and hold it until the button is backlit.
2. Press the On/Off 1 button and hold it until the lighthead button turns off.
Ø The LED sectors on the lighthead are turned off in sequence once the button is released.

Getinge Maquet PowerLED II Specifications

General

Brand	Getinge
Model	Maquet PowerLED II
Category	Medical Equipment
Language	English