Need help?Do you have a question about the GEZE GC 335 and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| Manufacturer | GEZE |
| Product Name | GC 335 |
| Color | Silver |
| Standards | EN 1154 |
Introduces the instruction manual for the GC 335 active infrared safety sensor.
Details product identification, directives, and applied standards for conformity.
Outlines available documentation and user instructions for the device.
Illustrates the internal design and labels components (a-q) of the sensor.
Explains the operating principle and function of the active infrared safety sensor.
Provides a checklist and steps for initial installation, including mounting the aluminum section.
Guides the installation of modules and their connections using flat cables.
Details the procedure for setting the monitoring beam relative to the closing edge.
Explains how to adjust the sensor's angle of inclination and detection range.
Illustrates detection field setups based on door leaf width and required modules.
Differentiates master and slave modules and covers their installation.
Explains bridge removal and common fault causes and remedies for the sensor.
Lists key technical data including range, voltage, and light characteristics.
Provides functional safety parameters, environmental conditions, and mechanical data.
Details the pinout for the sensor's terminal connections.
Lists the part numbers for GC 335 master, slave, and test body components.
Provides guidance on proper disposal, repair, and maintenance procedures.
To Next Page
