GFI System CLOCKWORK V3 - Auto Regen Swell

To Next Page

To Previous Page

CHAPTER6‐AutoRegenSwell



When you activate this feature the pedal automatically sweeps the Regen parameter to the maximum

value, hold it there, and sweeps it back to the previously set value‐It’s like having someone turns the

REPEATS knob while you’replaying. Used judiciously,thisfeature introduces useful dynamicelements to

thedelaytexture.

Press and hold [Preset Select].

TheparametercontrolledbyINTENSITYknobgradu‐

allysweepstomaximumvalue(asifsomeoneslowly

turnstheIntensityknoballthewayup).

currentvalue‐

TAP‐TEMPOENGAGE

Aslongasyouholdthefootswitchdown,the

Regenparameterstaysatitsmaximumvalueand

bothLEDsflashcontinuously.

REPEATS

Thenwhenyoufinallyreleasethefoot‐

switch,theRegenparameterslowly

sweepsbacktothepreviouslysetvalue.

Trythisout:

1. ActivateAMBIENTmode.

2. SettheRepeatsknobtoalowsetting(about9o’clock).

3. SetBlend,Time,andParamasdesired.

4. Startplaying,thedelaywillhavefewveryrepeats

5. Executeautoregenswell.

Note:AutoRegenswellfunctioncanalsobedoneusinganexternalswitchboxconnected

totheExp/Tapinput.

TAP‐TEMPOENGAGE

Related product manuals