3031 Schüttelinkubator
Shaking Incubator
Seite / Page 22 Rev.02 vom / dated 31.03.2014
6.4 Temperature calibration
The incubator was set and calibrated at a temperature of 45°C.
Calibration instructions for adjustment of the temperature regulator are avaible on request for
calibration purposes during maintenance. Please state model and serial numbers of the
Shaking Incubator.
6.5 Cleaning
If necessary, the unit may be cleaned with mild detergents.
GFL Shaking Incubators are produced with first class materials and are made to withstand
even rough service conditions. Nevertheless, the units should only be subjected to rough
conditions within sensible limits.
Please do not hesitate to contact your local dealer or us for technical support.
In case of complaints please contact your local dealer or us:
GFL Gesellschaft für Labortechnik mbH
Schulze-Delitzsch-Strasse 4 D-30938 Burgwedel Germany
Please do not return the unit without contacting either your local dealer or us!
Servicings, repairs or modifications must be carried out according to the
commonly recognised Technical Rules and Regulations by competent
electricians only.
Only original spare parts must be used. Always demand a detailed confirmation of the carried
out tasks by the person in charge (company, date, signature).
To Next Page
Loading...