GHL Doser Resource Guide
Release 07/2018
21
9. Click “OK” The logo on the doser will go white for a couple minutes, then turn blue.
When it goes back to blue, it indicates that it has connected to your network.
How to Connect via our GHL Smartphone App
Please follow the correct instructions for getting connected to your GHL Doser 2.1.
Direct Wi-Fi Connection
Please follow these steps if you wish to have a direct Wi-Fi connection to your
doser.
1. Go to your device’s Wi-Fi settings and search for available Wi-Fi networks. You should
see “GHL Doser 2.1” or “GHL Doser Maxi” listed.
2. Select “GHL Doser 2.1” and wait for your device to successfully connect to the doser’s
Wi-Fi hotspot.
3. Once your device has connected to the doser, open the “GHL Connect” app.
4. Select “Add Device” and select the device you wish to add.
5. You will then see two fill-in blanks, “Display name” and “Host/IP”. Give this connection
any name you wish. Please enter
10.10.100.254
into the “Host” section and tap “ADD”.
6. Select the connection you just made and the device will connect to the doser.
Standard Wi-Fi Connection
Please follow these steps if you have successfully added your GHL Doser to an
existing Wi-Fi network.
1. Open “GHL Connect” on your smartphone or tablet.
2. Select “Add Device” and select the device you wish to add.
3. You will then see two fill-in blanks, “Display name” and “Host/IP”. Give this connection
any name you wish. Please enter the doser’s IP address into the “Host” section and tap
“ADD”
* The doser’s IP address is the set of numbers you assigned to the doser during
standard Wi-Fi setup, page 14.
4. Select the new connection you just made and the device will connect to the doser.
To Next Page
Loading...
Need help?
General