Giant RIDESENSE - Reset and Reminders; Alerts and Indicators

or speed magnet motion
has been detected (valid
for peddling frequency
magnet only)
connection resumed once
peddling frequency
magnet or speed magnet
motion is detected by
RIDESENSE.
Reset Reset the device
Press and hold the RESET
button for 12 seconds and
wait for the red and yellow
indicator to light up once
respectively.
Low battery reminder
The alarm function starts
and the red LED light
flashes three times when
power of the battery gets
low. Replace the battery
immediately.
Replace the battery
immediately.
Enable handset alert
device function
Enable the function by
scanning the QRcode
printed in the
RIDESENSE label with
the GIANT App or enter
the barcode contained in
the accessory label in
App.
Please download your
GIANT App at Google
play (Android) or App
store (iOS).
Note: Please refer to the
GIANT App manual for
the shooting and scanning
steps.
Magnet light indicators
once started successfully
After the device has
awoken and there is
magnet motion detected in
the first 20 peddling, an
LED light indicator lights
up to validate the magnet
installation.
Yellow light: Peddling
frequency magnet
detection
Red light: Speed magnet
detection