Giant RIDESENSE - Function Modes; Pairing Modes; Power Saving and Sleep

Operating temperature
range
-20°C～60°C
Speed/pedaling
frequency App supported
OS versions
Android 4.3 or later;
iOS 7 or later
See individual App
installation manual for list
of compatible models.
Alarm App supported OS
versions
Android 4.3 or later;
iOS 7 or later
Support GIANT App only.
Please refer to individual
alarm App setup
guidelines.
Function mode
Function Description Remark
ANT+ pairing Connecting to meter
ANT+
To enable the meter’s
pairing mode and search
for RIDESENSE device,
please refer to the meter
user manual.
Bluetooth pairing Connecting to App To enable the App’s
pairing mode and search
for RIDESENSE device,
please refer to the App
user manual.
Power saving and sleep
The RIDESENSE goes
into sleep mode without
sensing any magnet
motion in 20 minutes.
The system auto wakes up
and is connected once a
peddling frequency or
speed magnet motion is
detected in sleep mode.
The device remains active
(instead of entering the
power saving and sleep
mode) in alarm mode.
Power saving, sleep and
wakeup
The RIDESENSE wakes
up once peddling magnet
The RIDESENSE device
is started and the