USER AND INSTALLATION MANUAL
43
MONOBLOCK IKALAMONOBLOCK IKALA
CONTROL PANEL
REMOTE CONTROL
The air conditioner can be controlled with the remote control. Two AAA-batteries are required.
NOTE: Further details of the functions can be found on the following page.
POWER
Press the POWER button to turn the
machine on or off.
MODE
Press the MODE button to switch between
cooling, heating, fan and dry modes.
FAN
Press the FAN button to change between
high, medium and low fan speeds
LED
Press the LED button to open or close the
LED light on unit, it can be a choice for sleep
condition.
Press the UP button to increase the desired
temperature or timer duration
Press the DOWN button to decrease the
desired temperature or timer duration
SILENT
Press it for silent mode, In Silent mode,
noise will be lower, fan works in low speed,
frequency is low.
SWING
Press to turn the louver swing function
on and off (only activated by the remote
control & APP)
TIMER
Press the TIMER button to set the automatic
switch-on/off.
Digital Display
Cooling
Air supply
Increase / Decrease Timer Speed Mode
Power
Heating Silent SpeedDry
4. OPERATION
To Next Page
