& SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or congures the SATA controllers
to AHCI mode.
Intel RST Premium With Intel Optane System Acceleration Enables RAID for the SATA controller.
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
& Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& SATA Port 0/1/2/3/4/5 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& Congured as eSATA
Enables or disables support for external SATA devices.
Intel(R) Ethernet Controller
This sub-menu provides information on LAN conguration and related conguration options.
Miscellaneous
& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
Off Disables the selected lighting mode when the system is on.
On Enables the selected lighting mode when the system is on. (Default)
& LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This item is congurable when LEDs in System Power On State is set to On.
Off Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
On Enables the selected lighting mode when the system enters S3/S4/S5 state.
& RST_SW (MULTIKEY) (Functionality of the RST_SW Button)
Set this button to HW Reset Use the button to reset your system. (Default)
Set this button to Switch LED On/Off Use the button to turn on/off the motherboard LEDs.
Set this button to Enter BIOS Setup Use the button to enter the BIOS Setup.
Set this button to Boot on Safe Mode Use the button to boot the system in safe mode.
& Onboard DB Port LED
Allows you to enable or disable the LED lighting of the motherboard debug LEDs when the system is on.
(Default: On)
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
(Note) This item is present only when you install a CPU that supports this feature.
- 40 -
To Next Page
Loading...
Need help?
General
