Gigabyte AORUS AD27Qd - Page 15

- 15 -
OSD Sidekick Installation Guide
Customizing the PIP/PBP Settings
Set the Picture-in-Picture (PIP)/ Picture-by-Picture (PBP) setting
to ON to activate the function. Select any of the following items to
congure the PIP/PBP settings:
D Click PBP to display the screen image from two sources side by side.
D Click PIP to display the screen image from the main source on the
full screen and the second source in a sub window.
D In PBP/PIP SOURCE, click the q icon to select the main source.
D If you have selected the PIP layout, in PIP SIZE, click the q icon to
set the sub window size to Large, Medium, or Small.
D If you have selected the PIP layout, in PIP LOCATION, click the q
icon to set the sub window location to Left-Top, Right-Top, Left-
Bottom, or Right-Bottom.
D Click PBP DISPLAY SWITCH to switch the main source and sub source,
regardless the screen layout.
D Click PBP AUDIO SWITCH to switch the audio source, regardless the
screen layout.