Gigabyte AORUS FI32Q X - Page 40

LCD Monitor User's Manual
-
40
-
Item Description
Other Settings
(continue)
• LED Indicator: By default, the LED indicator is set
to ON.
Always ON: The Power LED lights white during
operation and lights on and o in standby
mode(with 1 sec interval).
Always OFF: Turn o the Power LED.
Standby ON: The Power LED remains o during
operation and lights on and o in standby
mode(with 1 sec interval).
When the power supply is switched o, the
Power LED will remain o.
• HDMI 2.1 Support: Set the HDMI version to 2.1 or 2.0.
• Type-C DSC: Compat with device which support
DSC when turn this option into ON.
Note:
• Make sure to congure this option based on the
DisplayPort version supported by your graphics
card.