Gigabyte AORUS FI32Q X - USING THE DEVICE; Turning the Power On;Off

LCD Monitor User's Manual
-
23
-
USING THE DEVICE
Turning the Power On/O
Make sure the power switch next to the AC power input jack is switched
to ON.
Power On
1. Connect one end of the power cable to the AC IN jack at the rear of
the monitor.
2. Connect other end of the the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will
light in white, indicating the monitor is ready to use.
Note: If the Power LED remains o after you turn on the monitor, please check
the LED Indicator setting in the Settings menu. Refer to page 40 .
Note: When monitor power on, RGB LED on the rear side of monitor will turn
o automatically after 15 seconds in default setting. Please check the RGB LED
setting in the System menu for select dierent RGB LED patterns.