Gigabyte AORUS FO32U2P - Operations; Selecting Input Source

- 8 -
SelectingtheInputSource
1. Move the Control button right ( ) to enter the
Input menu.
2. Move the Control button up/down ( ) to
select the desired input source. Then press the
Control button to confirm.
Input
HDMI 1
HDMI 2
DP
Type-C
Exit Select
OPERATIONS
QuickSwitchMenu
By default, the Control button has been assigned with the specific function.
Note: To change the preset functions, refer to the “Quick Switch” section on page 18.
To access the Quick Switch functions, do the following:
• Move the Control button up ( ) to enter the BlackEqualizer menu.
Move the Control button up/down ( ) to
adjust the setting and press the Control button
to confirm.
Black Equalizer 2.0
Exit Select
10