Gigabyte GA-6OMM7E - USB Device Wake up Jumper (JP1); FWH Flash ROM Write Protect Jumper (JP20)

Panel and Jumper Definition
24
JP1: Rear USB Device Wake up Selection (USB Connector
Æ
USB1)
Pin No. Definition
1-2 close
Enabled Rear USB Device
Wake up
2-3 close Normal (Default)
(If you want to use “
USB KB/Mouse Wake from S3
”
function, you have to set the BIOS setting “USB KB/Mouse
Wake from S3” enabled, and the jumper “
JP1
” enabled).
*(Power on the computer and as soon as memory counting
starts, press <Del>. You will enter BIOS Setup. Select the
item “
POWER MANAGEMENT SETUP
”, then select “
USB
KB/Mouse Wake from S3: Enabled
”. Remember to save
the setting by pressing "ESC" and choose the “SAVE & EXIT
SETUP” option.)
USB 1
1
JP20: FWH Flash ROM Write Protect
1
Pin No. Definition
Open Normal (Default)
Close Write Protection
0
Please set Jumper JP20 to “Open”
to enabled BIOS write function when
you update new BIOS or new device.