6OMM7E Motherboard
65
PnP/PCI Configurations
Figure 8: PnP/PCI Configurations
•
••
•
Reset Configuration Data
Disabled Disable this function.
(Default value)
ESCD Clear PnP information in ESCD.
DMI Update Desktop Management Information data.
Both Clear PnP information in ESCD & update DMI data.
•
••
•
Resources Controlled by
Manual User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
Auto (ESCD) BIOS automatically use these PnP rescuers.
(Default value)
•
••
•
IRQ ( 3,4,5,7,9,10,11,12,14,15 )
Legacy ISA The resource is used by Legacy ISA device.
PCI/ISA PnP The resource is used by PCI/ISA PnP device (PCI or ISA).
CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
PnP/PCI Configurations
Reset Configuration Data Disabled Item Help
Resources Controlled By Auto (ESCD)
Menu Level
* IRQ Resources Press Enter
When resources are
controlled manually,
PCI/VGA Palette Snoop Disabled
assign each system
interrupt a type,
depending on the type
of device using the
interrupt
↑↓→
←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...
