BIOS Setup
50
•
BIOS Flash Protection
Enabled Enabled BIOS Flash Protection.
Disabled Disabled BIOS Flash Protection.
(Default Value)
•
••
•
First / Second / Third Boot device
Floppy Select your boot device priority by Floppy.
LS120 Select your boot device priority by LS120.
ZIP100 Select your boot device priority by ZIP100.
HDD-0~3 Select your boot device priority by HDD-0~3.
SCSI Select your boot device priority by SCSI.
CDROM Select your boot device priority by CDROM.
Disable Disable this function.
LAN Select your boot device priority by LAN.
•
••
•
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K
type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80 tracks.
(Default value)
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
•
••
•
Boot Up NumLock Status
On Keypad is number keys.
(Default value)
Off Keypad is arrow keys.
•
••
•
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System The system can not boot and can not access to Setup page will be denied
if the correct password is not entered at the prompt.
Setup The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt.
(Default value)
To Next Page
Loading...
