Suspend To RAM Installation
34
Step 2:
(If you want to use STR Function, please set jumper JP4 Closed.)
Pin No. Definition
Open STR Disabled (Default)
Close STR Enabled
1
Step 3:
Power on the computer and as soon as memory counting starts, press <Del>. You will enter
BIOS Setup. Select the item
“POWER MANAGEMENT SETUP”,
then select
“
ACPI Sleep
Type
: S3 / STR”
. Remember to save the settings by pressing "ESC" and choose the
“SAVE &
EXIT SETUP”
option.
Congratulation! You have completed the installation and now can use the STR function.
To Next Page
Loading...
