BIOS Setup
58
•
••
•
IDE HDD Block Mode
Enabled Enabled IDE HDD Block Mode.
(Default value)
Disabled Disabled IDE HDD Block Mode.
•
••
•
POWER ON by Keyboard
Password Enter from 1 to 5 characters to set the Keyboard Power On
Password.
Disabled Disabled Power On by keyboard.
(Default value)
Keyboard 98 Windows 98 keyboard “Power” key.
•
••
•
POWER ON by Mouse
Disabled Disabled Power On by Mouse.
(Default value)
Mouse Click Power On by Click Mouse .
•
••
•
Onboard FDC Controller
Enabled Enabled onboard FDC port.
(Default value)
Disabled Disabled onboard FDC port.
•
••
•
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enabled onboard Serial port 1 and address is 3F8.
(Default value)
2F8/IRQ3 Enabled onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enabled onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enabled onboard Serial port 1 and address is 2E8.
Disabled Disabled onboard Serial port 1.
•
••
•
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enabled onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enabled onboard Serial port 2 and address is 2F8.
(Default value)
3E8/IRQ4 Enabled onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enabled onboard Serial port 2 and address is 2E8.
Disabled Disabled onboard Serial port 2.
To Next Page
Loading...
