BIOS Setup
62
•
••
•
MODEM Use IRQ
NA Set MODEM Use IRQ to NA.
3 Set MODEM Use IRQ to 3.
4 Set MODEM Use IRQ to 4.
(Default value)
5 Set MODEM Use IRQ to 5.
7 Set MODEM Use IRQ to 7.
9 Set MODEM Use IRQ to 9.
10 Set MODEM Use IRQ to 10.
11 Set MODEM Use IRQ to 11.
•
••
•
Suspend Mode
Disabled Disabled Suspend Mode.
(Default value)
1 min - 1 Hour Setup the timer to enter Suspend Mode.
•
••
•
HDD Power Down
Disabled Disabled HDD Power Down mode function.
(Default value)
1-15 mins. Enabled HDD Power Down mode between 1 to 15 mins.
•
••
•
Soft-off by PWR-BTTN
Instant-off Soft switch ON/OFF for POWER ON/OFF.
(Default value)
Delay 4 Sec. Soft switch ON 4sec. for POWER OFF.
•
••
•
Power LED in Suspend
Blinking Set Power LED in Suspend at Blinking mode.
(Default value)
On Set Power LED in Suspend at On mode.
Off/Dual Set Power LED in Suspend at Off/Dual color mode.
•
••
•
Wake-Up by PCI card
Disabled Disabled this function.
Enabled Enabled wake-up by PCI card.
(Default value)
•
••
•
ModemRingOn / WakeOnLan
Disabled Disabled these functions.
Enabled Enabled these functions.
(Default value)