BIOS Setup
37
Figure 5-1: Integrated Peripherals
On-Chip Primary PCI IDE
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
IDE Primary Master PIO (for onboard IDE 1st channel)
Auto BIOS will automatically detect the IDE HDD Accessing mode. (Default value)
Mode0~4 Manually set the IDE Accessing mode.
@ This item will be available when "UART Mode Select" is set to IrDA or ASKIR.
This item will be available when "CIR Port Address" is set to 310 or 320.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Integrated Peripherals
@ UR2 Duplex Mode Half Item Help
Onboard Parallel Port 378/IRQ7 Menu LevelX
Parallel Port Mode SPP
X ECP Mode Use DMA 3
AC BACK Function Soft-Off
Game Port Address 201*
Midi Port Address 330*
Midi Port IRQ 10*
CIR Port Address Disabled
CIR Port IRQ 11
KLJI: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
"*" For GA-6OXT-A only.
To Next Page
Loading...
