BIOS Setup
47
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled Disable this function. (Default Value)
Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date ( of Month) Alarm : Everyday, 1~31
Time ( hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
Primary IDE 0/1
Disabled Disable this function. (Default value)
Enabled Enable monitor Primary IDE 0/1 for Green event.
Secondary IDE 0/1
Disabled Disable this function. (Default value)
Enabled Enable monitor Secondary IDE 0/1 for Green event.
FDD,COM,LPT Port
Disabled Disable this function. (Default value)
Enabled Enable monitor FDC,COM,LPT for Green event.
PCI PIRQ[A-D] #
Enabled Monitor PCI PIRQ[A-D]# IRQ Active.
Disabled Ignore PCI PIRQ[A-D]# IRQ Active. (Default value)