GA-6OXT(-A) Motherboard
60
Q-Flash Introduction
A. What is Q-Flash Utility?
Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS
mode, no more fooling around any OS.
B. How to use Q-Flash?
a. After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it
will allow you to enter AWARD BIOS CMOS SETUP, then press <F8> to enter Q-Flash utility.
b. Q-Flash Utility
Q-Flash Utility V3.06
Flash Type/Size : SST 39SF020 / 256K
Keep DMI Data : Yes
Space Bar:Change Value
Enter: Run ESC: Reset K/L: Select Item
Load BIOS from Floppy
Save BIOS to Floppy
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
`Standard CMOS Features ` Frequency/Voltage Control
`Advanced BIOS Features Load Fail-Safe Defaults
` Advanced Chipset Features Load Optimized Defaults
`Integrated Peripherals Set Supervisor Password
`Power Management Setup Set User Password
`PnP/PCI Configurations Save & Exit Setup
`PC Health Status Exit Without Saving
ESC:Quit KLJI:Select Item
F8: Q-Flash F10:Save & Exit Setup
Time, Date, Hard Disk Type...
Enter Q-Flash Utility (Y/N)? Y
To Next Page
Loading...
