BIOS Setup
53
PCI/AGP Divider
You can choose Disabled,PLL/40,PLL/32,PLL/24,PLL/20/PLL/16 mode to adjust PCI/AGP
frequency.
PCI/AGP Frequency(Mhz)
Setup PCI/AGP frequency by adjusting CPU Host Frequency or PCI/AGP Divider item.
Host/DRAM Clock Ratio
(Warning: wrong frequency may make system can’t boot, clear CMOS to overcome wrong fre
quency issue)
0.75 Memory Frequency = Host clock X 0.75.
1.00 Memory Frequency = Host clock X 1.00.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency(Mhz)
The values depend on CPU Host Frequency(Mhz) .
To Next Page
Loading...
