- 6 -
GA-8INXP Motherboard
English
Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification because
these specific bus frequencies are not the standard specifications for CPU, chipset and most of the
peripherals. Whether your system can run under these specific bus frequencies properly will
depend on your hardware configurations, including CPU, Chipsets, SDRAM, Cards…etc.
On-Board Sound — Realtek ALC650 CODEC
— Line Out / 2 front speaker
— Line In / 2 rear speaker (by s/w switch)
— Mic In / center & subwoofer (by s/w switch)
— SPDIF Out / SPDIF In
— CD In / AUX In / Game Port
On-Board RAID / Serial ATA — Onbard Promise PDC20276 / Silicon Image Sil3112A
— Supports data striping (RAID 0) or mirroring (RAID 1)
— Supports concurrent dual IDE controller operation
— Supports IDE bus master operation
— Displays status and error checking messages during boot-up
— Mirroring supports automatic background rebuilds
— Features LBA and Extended Interrupt 13 drive translation in
controller onboard BIOS
PS/2 Connector — PS/2 Keyboard interface and PS/2 Mouse interface
BIOS — Licensed AWARD BIOS, 4M bit Flash ROM
— Supports Dual BIOS / Q-Flash
Additional Features — Support CPU Dual Power System (DPS)
— PS/2 Keyboard power on by password; PS/2 Mouse power on
— USB KB/Mouse wake up from S1, S3
— USB KB/Mouse power on from S5
— STR(Suspend-To-RAM)
— Wake on LAN (WOL)
— AC Recovery
— Poly fuse for keyboard over-current protection
— Supports EasyTune
™
4
— Supports @BIOS
™
"*" HT functionality requirement content :
Enabling the functionality of Hyper-Threading Technology for your computer system requires
all of the following platform components:
- CPU: An Intel
®
Pentium 4 Processor with HT Technology
- Chipset: An Intel
®
Chipset that supports HT Technology
- BIOS: A BIOS that supports HT Technology and has it enabled
- OS: An operation system that has optimizations for HT Technology