Introduction
English
- 5 -
Chapter 1 Introduction
to be continued...
Features Summary
Form Factor — 30.5cm x 24.4cm ATX size form factor, 6 layers PCB
Motherboard — GA-8INXP Motherboard
CPU — Socket 478 for Intel
®
Micro FC-PGA2 Pentium
®
4 processor
— Support Intel
®
Pentium
®
4 (Northwood, 0.13 m) processor
— Support Intel
®
Pentium
®
4 Processor with HT Technology *
— Intel
®
Pentium
®
4 533/400MHz FSB
— 2nd cache depends on CPU
Chipset — Intel
®
E7205 Host/Memory controller
— Intel
®
ICH4 MuTIOL Media I/O
Memory — 4 184-pin DDR DIMM sockets
— Supports Dual channel DDR266/DDR200 DIMM
— Supports 128MB/256MB/512MB/1GB unbuffered DRAM
— Supports up to 4GB DRAM (Max)
— Supports only 2.5V DDR DIMM
— Supports 64bit ECC type DRAM integrity mode
I/O Control — ITE8712F
Slots — 1 AGP 3.0 slot supports 8X/4X mode
— 5 PCI slots support 33MHz & PCI 2.2 compliant
On-Board IDE — 2 IDE controllers provides IDE HDD/CD-ROM (IDE1, IDE2)
with PIO, Bus Master (Ultra DMA33/ATA66/ATA100)
operation modes
— IDE3 and IDE4 Compatible with RAID, Ultra ATA133/100, EIDE
Serial ATA — 2 Serial ATA connectors in 150 Mb/s operation mode
— Controlled by Silicon Image SiI3112A
On-Board Peripherals — 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M
and 2.88M bytes
— 1 Parallel port supports Normal/EPP/ECP mode
— 2 Serial ports (COMA & COMB)
— 6 USB 2.0/1.1 ports (2 x Rear, 4 x Front by cable)
— 1 IrDA connector for IR
— 1 Smart Card Reader connector
— 1 Front Audio connector
Hardware Monitor — CPU/System/Power fan revolution detect
— CPU temperature detect
— System voltage detect
— CPU/System/Power Fan Fail warning
On-Board LAN — Builit in Intel
®
RC82540EM (KENAI 32) Chipset
— 1 RJ45 port
To Next Page
Loading...
Need help?
General
