Technical Reference- 83 -
English
4 Channel Analog Audio Output Mode
STEP 1 :
Connect the front channels to "Line Out", the rear
channels to "Line In".
STEP 3 :
Select "Speaker Configuration", and choose the "4
channels for 4 speakers out put".
Disable "Only SURROUND-KIT",
and press "OK".
When the "Environment settings" is "None", the sound
would be performed as stereo mode (2 channels
output). Please select the other settings for 4 chan-
nels output.
STEP 2 :
After installation of the audio driver, you'll find an
icon on the taskbar's status area. Click the audio icon
"Sound Effect" from the windows tray at the bottom of
the screen.
Line Out
Line In
To Next Page
Loading...
