Gigabyte GA-E240N - MB Intelligent Tweaker (M.I.T.) for Performance; IGX Configuration and Graphics Settings; Overclocking and Voltage Adjustment Warnings

- 23 -
2-3 MB Intelligent Tweaker(M.I.T.)
Whether the system will work stably with the overclock/overvoltage settings you made is dependent
onyouroverallsystemcongurations.Incorrectlydoingoverclock/overvoltagemayresultindamage
to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced
users only and we recommend you not to alter the default settings to prevent system instability or
other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If
this occurs, clear the CMOS values and reset the board to default values.)
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
MB Intelligent Tweaker(M.I.T.)
` IGX Conguration [Press Enter]
CPU Frequency(MHz) [Normal]
CPU Host Clock Control [Auto]
x CPU Host Clock 100
Set Memory Clock [Auto]
x Memory Clock x5.33 1066Mhz
` DRAM Conguration [Press Enter]
********
System Voltage Optimized
********
System Voltage Control [Auto]
x DIMM OverVoltage Control Auto
Normal CPU Vcore 1.3000V
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level `
(Note) This item is present only when you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
IGX Conguration
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level ``
UMA Frame Buffer Size [Auto]
VGA Core Clock control [Auto]
x VGA Core Clock(MHz) 500
& IGXConguration
& UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB, 512MB,
1024MB.
& VGA Core Clock control
Allows you to determine whether to manually set the VGA Core clock. (Default: Auto)
& VGA Core Clock(MHz)
Allows you to set the onboard graphics clock. The adjustable range is from 300 MHz to 2000 MHz. This
itemiscongurableonlyiftheVGA Core Clock control option is set to Manual.