Gigabyte GA-E240N - Advanced BIOS Features: Performance Tuning; CPU Power Saving and Virtualization Features; Boot Device Order and EFI Settings

- 27 -
2-5 Advanced BIOS Features
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Advanced BIOS Features
` IGX Conguration [Press Enter]
AMD C6 Support [Disabled]
Virtualization [Disabled]
AMD K8 Cool&Quiet control [Auto]
C-state Pmin [Auto]
` Hard Disk Boot Priority [Press Enter]
EFI CD/DVD Boot Option [Auto]
First Boot Device [Hard Disk]
Second Boot Device [CDROM]
Third Boot Device [USB-HDD]
Password Check [Setup]
HDD S.M.A.R.T. Capability [Disabled]
Away Mode [Disabled]
Full Screen LOGO Show [Enabled]
Init Display First [PCI Slot]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level `
& IGXConguration
The settings in this submenu are synchronous to those under the same items on the MB Intelligent
Tweaker(M.I.T.) main menu.
& AMD C6 Support
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
state is a more enhanced power-saving state than C1. (Default: Disabled)
& Virtualization
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Disabled)
& AMD K8 Cool&Quiet control
Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce
heat output from your computer and its power consumption. (Default)
Disabled Disables this function.
& C-state Pmin
Allows you to determine whether to let the CPU enter C1 mode in system halt state. When enabled, the
CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.
AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)
& Hard Disk Boot Priority
Speciesthesequenceofloadingtheoperatingsystemfromtheinstalledharddrives.
Use the up or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the
minus key <-> (or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when
nished.
& EFI CD/DVD Boot Option
Set this item to EFI if you want to install the operating system to a hard drive larger than 2.2 TB. Make sure
the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-bit and
Windows Server 2003 64-bit. AutoletstheBIOSautomaticallycongurethissettingdependingonthe
hard drive you install. (Default: Auto)