Hardware Installation Process
English
- 27 -
7) FDD (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and
2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the same side with the Pin1.
8) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Important Notice:
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
1
33
2
34
3940
IDE1
12
IDE2
K8n pro_1001_q.p65 2003/8/18, ¤U¤È 06:0527
To Next Page
Loading...