Gigabyte GA-X79-UD3 - Page 44

BIOS Setup - 44 -
PWM Phase Control &
Allows you to automatically change the PWM phase according to the CPU load. The power-saving levels
are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance), Balanced,
Perf (Performance), Mid PWR (Mid Power), and Lite PWR (Light Power). Auto lets the BIOS automatically
congure this setting. (Default: Auto).
Vcore Voltage Response &
Allows you to congure the response time for Vcore changes using four preset levels.
Auto  Lets the BIOS automatically congure this setting. (Default)
Standard~Extreme Selects  Standard, Fast, Turbo, or Extreme which represents different levels of
the response time for Vcore changes.
Vcore Loadline Calibration & ( mΩ)
Allows you to congure Vcore Load-Line Calibration. This item allows you to adjust the V-droop value. The
higher the V-droop value, the lower the output voltage will be under heavy load.
Auto  Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0.00mΩ~+6.00mΩ  Adjusts the V-droop value.
IMC Voltage Loadline Calibration &
Allows you to congure Load-Line Calibration for the IMC voltage. This item allows you to adjust the V-droop
value. The higher the V-droop value, the lower the output voltage will be under heavy load.
Auto  Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0.00mΩ~+12.00mΩ  Adjusts the V-droop value.
DDR CH(A/B) Voltage Loadline Calibration &
Allows you to congure Load-Line Calibration for Channel A and Channel B memory voltage. This item
allows you to adjust the V-droop value. The higher the V-droop value, the lower the output voltage will be
under heavy load.