Gigabyte GA-X79-UD3 - Page 45

- 45 - BIOS Setup
Auto  Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0.00mΩ~+12.00mΩ  Adjusts the V-droop value.
DDR CH(C/D) Voltage Loadline Calibration &
Allows you to congure Load-Line Calibration for Channel C and Channel D memory voltage. This item
allows you to adjust V-droop. The higher the V-droop value, the lower the output voltage will be under heavy
load.
Auto  Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0.00mΩ~+6.00mΩ  Adjusts the V-droop value.
CPU Vtt Loadline Calibration &
Allows you to congure Load-Line Calibration for the CPU Vtt voltage. This item allows you to adjust V-droop
at different levels. The higher the V-droop value, the lower the output voltage will be under heavy load.
Auto  Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0.00mΩ~+6.00mΩ  Adjusts the V-droop value.
Vcore Protection &
Allows you to set the voltage limit on the Vcore for over-voltage protection. The adjustable range is from
150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting. (Default: Auto)
CPU Vtt Protection &
Allows you to set the voltage limit on the CPU Vtt voltage for over-voltage protection. The adjustable range
is from 150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting. (Default: Auto)
IMC Voltage Protection &
Allows you to set the voltage limit on the IMC voltage for over-voltage protection. The adjustable range is
from 150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting. (Default: Auto)
DDR CH(A/B) Voltage Protection &
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
DDR CH(C/D) Over Voltage Protection &
Allows you to set the voltage limit on Channel C and Channel D memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
Vcore Current Protection &
Allows you to set the current limit on the Vcore for over-current protection in terms of percentage. The
adjustable range is from 40.0% to 128.0%. Auto lets the BIOS automatically congure this setting. (Default:
Auto)
CPU Vtt Current Protection &
Allows you to set the current limit on the CPU Vtt voltage for over-current protection in terms of percentage.
The adjustable range is from 50.0% to 160.0%. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
IMC Current Protection &
Allows you to set the current limit on the IMC voltage for over-current protection in terms of percentage.
The adjustable range is from 50.0% to 160.0%. Auto lets the BIOS automatically congure this setting.
(Default: Auto)