- 63 -
 & AC BACK
  Determines the state of the system after the return of power from an AC power loss.
 AlwaysOff   ThesystemstaysoffuponthereturnoftheACpower.(Default)
 Always On      The system is turned on upon the return of the AC power.
 Memory      The system returns to its last known awake state upon the return of the AC power.
 & Power On By Keyboard
  Allows the system to be turned on by a PS/2 keyboard wake-up event.
  Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
 Disabled   Disablesthisfunction.(Default)
 Any Key      Press any key to turn on the system.
 Keyboard 98    Press POWER button on the Windows 98 keyboard to turn on the system.
 Password      Set a password with 1~5 characters to turn on the system.
 & Power On Password
  Set the password when Power On By Keyboard is set to Password.
  Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. 
To turn on the system, enter the password and press <Enter>.
  Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter> 
again without entering the password to clear the password settings.
 & Power On By Mouse
  Allows the system to be turned on by a PS/2 mouse wake-up event.
  Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
 Disabled   Disablesthisfunction.(Default)
 Move        Move the mouse to turn on the system.
 Double Click    Double click on left button on the mouse to turn on the system.
2-8  Power Management