Gigabyte MC12-LE0 - Page 52

- 52 -
BIOS Setup
Parameter Description
Memory Addressing
(continued)

Memory interleaving size
– Controls the memory interleaving size. This determines the starting
address of the interleave (bit 8, 9, 10 or 11).
– Options available: Auto, 256Bytes, 512Bytes, 1KB, 2KB. Default
setting is Auto.

1TB remap
– Enable/DisabletoremapDRAMoutofthespacejustbelowthe1TB
boundary.TheabilitytoremapdependsonDRAMconguration,
NPS, and interleaving selection, and may not always be possible.
– Options available: Auto, Do not remap, Attempt to remap. Default
setting is Auto.

DRAM map inversion
– Enable/Disable the DRAM map inversion function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
ACPI
Press[Enter]forcongurationofadvanceditems.

ACPI SRAT L3 Cache As NUMA Domain
– Enable/Disable report each L3 cache as a NUMA Domain to the
OS.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

ACPI SLIT Distance Control
– Determines how the SLIT distances are declared.
– Options available: Auto, Manual. Default setting is Auto.

ACPI SLIT remote relative distance
– Sets the remote socket distance for 2P systems as near (2.8) or far
(3.2).
– Options available: Auto, Near, Far. Default setting is Auto.
Link
Press[Enter]forcongurationofadvanceditems.

GMI encryption control
– Enable/Disable GMI link encryption.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

xGMI encryption control
– Enable/Disable xGMI link encryption.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

CAKE CRC perf bounds Control
– Options available: Auto, Manual. Default setting is Auto.

4-link xGMI max speed
– Speciesthemaxspeedof4-linkxGMI.
– Default setting is Auto.

3-link xGMI max speed
– Speciesthemaxspeedof3-linkxGMI.
– Default setting is Auto.