- 41 -
BIOS Setup
2-2-7 PCI Subsystem Settings
Parameter
Description
PCIEx4 Slot
Change the PCIEx4 lanes.
Options available: Disabled, Enabled. Default setting is Enabled.
PCIEx4 I/O ROM
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Disabled, x16, x8 x8, x8 x4 x4, x4 x4 x8, x4 x4 x4 x4.
Default setting is x16.
PCIEx16 Slot
Change the PCIEx16 lanes.
Options available: Disabled, Enabled. Default setting is Enabled.
PCIEx16 I/O ROM
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Onboard LAN3/4 Controller
(Note)
Enable/Disable the onboard LAN controller.
Options available: Enabled, Disabled. Default setting is Enabled.
Onboard LAN3/4 I/O ROM
(Note)
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
Options available: Enabled, Disabled. Default setting is Enabled.
Above 4G Decoding
Enable/Disable memory mapped I/O to 4GB or greater address space
(Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is Disabled.
(Note) This section is dependent on the available LAN controller.
To Next Page
Loading...
Need help?
General
