Gigabyte MC12-LE0 - Page 53

- 53 -
BIOS Setup
Parameter Description
Link
(continued)

xGMI TXEQ Mode
– ConguresxGMITXEQ/RXvettingMode.
– Options available: Auto, TXEQ_Disabled, TXEQ_Lane, TXEQ_Link,
TXEQ_RX_Vet. Default setting is Auto.

PcsCG control
– Options available: Auto, Enable. Default setting is Auto.
Disable DF to external
downstream IP
SyncFloodPropagation
Enable/Disable SyncFlood to UMC & downstream slaves.
Optionsavailable:Auto,Syncooddisabled,Syncoodenabled.
Default setting is Auto.
DisableDFsyncood
propagation
Enable/Disable DF Sync Flood propagation.
Optionsavailable:Auto,Syncooddisabled,Syncoodenabled.
Default setting is Auto.
CC6 memory region encryption
Controls whether or not the CC6 save/restor memory is encrypted.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Memory Clear
Enable/Disable the Memory Clear feature.
Options available: Auto, Enabled, Disabled. Default setting is Auto.