Gigabyte R282-Z93 - Page 14

Hardware Installation - 14 -
Front Panel I/O
 2 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
 1 x HDD activity LED
 2 x LAN activity LED
Rear Panel I/O
 2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Backplane I/O
 9CBP20C4NR-00: 12 x SATA/SAS ports
 Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
TPM
 1 x TPM header with SPI interface
 TPM2.0 kit: CTM010 (optional)
System
Management
 Aspeed® AST2500 management controller
 AMI MegaRAC SP-X Solution web interface
 Dashboard
 JAVA Based Serial Over LAN
 HTML5 KVM
 Sensor Monitor (Voltage, RPM, Temperature, CPU Status etc.)
 Sensor Reading History Data
 FRU Information
 SEL Log in Linear Storage / Circular Storage Policy
 Hardware Inventory
 Fan Prole
 System Firewall
 Power Consumption
 Power Control
 LDAP / AD / RADIUS Support
 Backup & Restore Conguration
 Remote BIOS/BMC/CPLD Update
 Event Log Filter
 User Management
 Media Redirection Settings
 PAM Order Settings
 SSL Settings
 SMTP Settings