2-5 Settings
Platform Power
& AC BACK
Determines the state o the system ater the return o power rom an AC power loss.
Memory The system returns to its last known awake state upon the return of the AC power.
Always On The system is turned on upon the return of the AC power.
Always O The system stays o upon the return o the AC power. (Deault)
& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Deault: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm,
power on by mouse, and power on by keyboard.
& Soft-Off by PWR-BTTN
Congures the way to turn o the computer in MS-DOS mode using the power button.
Instant-O Press the power button and then the system will be turned o instantly. (Deault)
Delay 4 Sec. Press and hold the power button or 4 seconds to turn o the system. I the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically congure this
setting. (Deault: Auto)
& Resume by Alarm
Determines whether to power on the system at a desired time. (Deault: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& Wake on LAN
Enables or disables the wake on LAN unction. (Deault: Enabled)
& High Precision Event Timer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Deault: Enabled)
- 29 -
To Next Page
Loading...
Need help?
General
Weight and Dimensions
