34
Sending SMS (text messages)
Gigaset C300-C300A/CS310-CS310A / GBR / A31008-M2223-L101-4-7619 / sms_BRD_neutral.fm / 13.09.2012
Version 4, 16.09.2005
Sending SMS
(text messages)
Your phone is prepared for sending SMS
messages.
Prerequisites:
u Calling Line Identification is enabled for
your phone line.
u Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u To receive SMS messages, you must be
registered with your service provider.
This occurs automatically when you send
your first SMS.
Writing/sending SMS
Writing an SMS
§Menu§ ¤ SMS ¤ Write Message
~ Write SMS.
Sending an SMS
c Press the talk key
Or:
§Menu§ Press the display key.
Send Text Select and press §OK§.
s / ~ Select number with area code
(even if you are in that area)
from the directory or enter
directly.
§OK§ Press the display key. The SMS is
sent.
Outgoing list
You can save an SMS in the outgoing list, and
edit and send it later.
Saving an SMS in the outgoing list
¤ You are writing an SMS (¢ page 34).
§Menu§ Press the display key.
Save Text Select and press §OK§.
Opening the outgoing list
§Menu§ ¤ SMS ¤ Outgoing
The first list entry is displayed, for example:
Please note
If your phone is connected to a PABX,
please see page 37.
Please note
u For instructions on entering text and
special characters, please see
page 61.
u An SMS can be up to 160 characters.
Please note
u If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the outgoing
list.
u If the memory is full, or if the SMS
function on the base is being used by
another handset, the operation is
cancelled. An appropriate message
appears in the display. Delete SMS
messages you no longer require or
send the SMS later.
t
Saved 02
28.06. 08:34
x
Back Menu
To Next Page
Loading...
