Gill W013 - Timer Mode Countdown Timer

6.1 Timer Mode - Countdown Timer
[S/R]*
[S/R]*
[S]
[S/L/S]
[S/R]*
[S/R]*
[S/R]*
User
Define
*Remark: Timer is stopped
Countdown Timer (Four Pre-set Values
& One User-defined Value)
- This watch’s timer has four pre-set values:
5.4.1.0, 5.Min, 3.Min and 1.Min, and one user
defined value. Press the [S/R] button to
change the display among them.
Multiples of the Pre-set Value
- After you have chosen one of the
pre-set values, you can multiply those
values by pressing the [S] button.
For example: If the pre-set value is
3-Min, press the [S] button once to
double it to 6 minutes; press the [S] button
twice to triple it to 9 minutes... and so on.
Press the [S/L/S] button to start the timer,
the countdown icon will start flashing.