45
Step 3: Bring the wristband out from the buckle, and fold back the wristband,
as shown in Fig. E. Then press the Velcro (2) to make it stick to the outer side of
wristband rmly, as shown in Fig. F.
Fig. E Fig. F
Disassembly: The process of wristband disassembly is similar to the installation
method, but with reverse procedure.
Note: Please detach the wristband from the oximeter before cleaning the
wristband.
C - DOWNLOAD APP SOFTWARE ONTO SMART PHONES
Terminal devices such as Android/iOS smart phones can be used to receive
data from the Oximeter in real-time, store the received data, and also review the
stored data. To use this function, download the corresponding APP software
onto the smart phone device.
Please follow the procedure to down-
load:
1. Scan the QR Code image in below
Figure.
2. When successfully scanned, a web
link for downloading the APP soft-
ware will be displayed.
3. Open the web link to download the
APP software.
4. Install the software when success-
fully downloaded.
ENGLISH
To Next Page
Loading...
