30
In the image above it is possible to verify that amount of coffees dispensed.
Using the "Reset Counters" function, the value of the "Number of coffees" parameters will be reset without
resetting the "Total coffee" value.
g) Settings
This screen displays the possibility of modifying the boiler temperature without interfering on the
temperatures of the unit and the water used to dispense the coffee. The latter refer to the temperature
values set automatically according to the blends used.
"Load with coffee" is closely connected to the type of machine; it is therefore recommended not to enable
it.
By disabling "Steam Heating", the machine prevents the heating of the relative boiler, making it inefficient
by also activating the switch on the front panel of the machine.
To Next Page
Loading...
