Transport and location 28
Cod.nº 429043
Rev. No. 21/0519
2. RECEIPT, TRANSPORT AND LOCATION
2.1. Receipt
The following should be checked on accepting delivery of the washer:
• Check that the product has not suffered any damage in transit. (Any damage caused in this way will not
be attributable to the manufacturer, and the appropriate claim should be made against the party
responsible for transporting the product.)
• Check that the delivered machine fulfils the requirements requested in the order: MODEL, VOLTAGE,
FREQUENCY AND TYPE OF HEATING.
THE MACHINE’S PACKAGING MUST BE DISPOSED OF IN ACCORDANCE WITH THE
ENVIRONMENTAL REGULATIONS IN FORCE IN THE COUNTRY OR AREA IN WHICH THE MACHINE IS
TO BE USED.
2.2. Transport of the machine
IT IS BOUND THAT ALL MANOEUVRES ARE CARRIED OUT BY STAFF SPECIALISED IN
TRANSPORT.
ALWAYS USE TRANSPORT METHODS WHICH ARE SUITABLE FOR THE WEIGHT AND VOLUME OF
THE WASHER. CHECK THE VALUES ON THE PACKAGING AND THE INSTALLATION SPECS
(section 1.4) OF THIS MANUAL.
• Before moving the washer, check the instructions of the packaging pictograms.
• Unit must be transported in the upright position.
• Protect the machine from rain and dampness.
• Avoid blows and shocks.
• It is preferable to transport the washer with its packaging using a forklift and by lifting it from its base.
Never move the machine by pushing on the sides of the packaging.
• Position the washer with crating as near as possible to the final location.
HS-6023; EH055
This model has lifting handles located at the outer dru
which allows lifting the machine with a crane.
Unlock the upper cover and remove it to access the lifting
handles. (Fig. 2.1)
Replace and lock the top cover correctly, when the
installation is finished.
To Next Page
Loading...
