Bravo pH Monitoring System 28 User Guide
chapter.fm 3/21/16 4:05 pm
5.5 x 7.75 inches (140 mm x 197 mm)
Uploading pH Data
The Bravo recorder supports both AccuView and Reflux software.
1. Connect the Bravo recorder to your PC using the supplied USB cable.
2. Open AccuView or Reflux software by double-clicking the AccuView or Reflux
software icon on your desktop.
3. Click
Upload
. A progress
bar appears. Once the
upload is complete, the
Edit Information & Diary
screen appears.
4. If more than one protocol
is available for the Bravo
pH capsule, select the
desired one from the
Protocol
list.
5. Click
OK
.
Note
To perform multiple uploads from the same recorder, disconnect the
recorder from the USB and reconnect it again between uploads.
To Next Page
Loading...