Bravo pH Monitoring System 11 User Guide
chapter.fm 3/21/16 4:05 pm
5.5 x 7.75 inches (140 mm x 197 mm)
Setting the Date and Time
You must set the date and time the first time you turn on the recorder or if the battery has
fully discharged. Once the date and time are set (and as long as the battery does not fully
discharge), the recorder maintains the correct date and time, even when it is turned off.
However, if the battery was fully discharged before turning the recorder on, the screen will
automatically display the
Set Date/Time
screen.
To set the date and time:
1. The first part of the date (for example, the day field) is
highlighted. Use below the icon displayed on
the screen and ( on the screen) to change it to
the correct date. Press ( on the screen) to move to the next field.
2. Repeat this process for the rest of the date (for example, month and year).
3. Repeat this process to set the time. When you are done, press
Enter
. You are
returned to the main menu.
If time and date are correct, press
ESC
and return to the main menu.
Choosing Study Settings
1. From the main screen, select
Settings
. This screen
appears:
2. Set the number of capsules as follows:
a. With the cursor on
pH Capsules #1
, press
Enter
.
b. Use to select the number of capsules.
c. Press
Enter
. You move on to the next setting:
Study Duration
.
3 Set the study duration as follows:
a. With the cursor on
Study Duration
, press
Enter
.
b. Use to select the study duration (24, 48, or 96 hours).
Note
The 96-hour option is only available if you are using AccuView or
Reflux software as your PC software application.
Set Date/Time
DD-MM-YY
hh:mm AM/PM
►
pH Capsules #1
Study Duration: 48hr
Preferences:
►
To Next Page
Loading...