EasyManua.ls Logo

Given Imaging Bravo - Recorder Maintenance; Safety and Technical Checks; Cleaning the Recorder; Cleaning the Case and Strap

Default Icon
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bravo pH Monitoring System 29 User Guide
chapter.fm 3/21/16 4:05 pm
5.5 x 7.75 inches (140 mm x 197 mm)
Recorder Maintenance
Safety and Technical Checks
There are no required safety or technical checks, and no periodic maintenance for the
recorder.
The recorder contains no serviceable components apart from the battery. If the recorder
requires repair or is nonfunctional, contact customer support.
Cleaning the Recorder
Clean the recorder after each study.
1. Turn off the recorder.
2. Wipe the exterior surface of the recorder with 70–90% isopropyl alcohol.
3. Allow any alcohol to dry thoroughly before using the recorder.
Cleaning the Case and Strap
Wipe the case and strap with any commonly-used disinfectant.
Servicing the Battery
The recorder operates on one internal rechargeable lithium battery. When the battery has
been recharged 275 times, a message appears on the screen reminding you to replace the
battery.
Contact customer support to have the battery replaced.
!
Caution
Do not allow liquid to get into the recorder body or inside the front
cover. The recorder is not fluid resistant. Allowing any fluid (alcohol,
water, etc.) inside of the recorder can damage the recorder and cause
it to malfunction.